LM10V332 335 LM10V332 335 free download

File name 8m051994 LM10V332 335.pdf

8m051994 5% - 100% +Vin 0 approx. 1.5 ms* 3 Dimming Options (valid when the "C" jumper is removed) Endicott Research Group, Inc. 2601 Wayne St., Endicott NY 13760 607-754-9187 Fax 607-754-9255 http://www.ergpower.com 8m051994 8m Class DC to AC Inverter * should be selected to be compatible with LCD and display driver + Vin - (1) 1 3 Pulse-Width Modulated Controlled Specifications and Applications Information 4/14/00 Preliminary 2 +Vin 100 Kohms* The ERG 8m051994 (8m Class) low profile dc to ac inverter is specifically designed to power the Sharp LM10V33 LCD display module to a moderate brightness level from a +5 volt dc source. This low profile inverter features: 1 3 8m Package Package Configuration 1234 Input .55 [14,0] c * value should be low enough to maintain minimum tube current at minimum brightness + Vin - (1) Resistive Controlled 2 ь ь ь ь ь ь ь ь ь Vmin* to +Vin Less Than 8 mm in Height LCD Module Specific Display Compatible Output Connector Firm Specifications Application Information Designed, Manufactured and Supported in the USA Custom Input and Output Voltages Flexible System Interface Notebook Display Head Compatible 2.35 [59,7] 3.58 [90,9] * Vmin should be high enough to maintain minimum tube current + Vin - (1) 1 3 Voltage Controlled Pin Descriptions Input Connector Output Connector JST SM02(8.0)B-BHS-1-TB 2 4 pins are 0.315" [8,00] Long, 0.025" [0,63] Square and are on 0.100" [2,54] Centers. .120 [3,05] DIA.(2X) Output .55 [14,0] 4 1 .12 [3,0] .79 [20,1] Note 1 Input by-pass capacitor (25 uf - 100uf) may be required to reduce reflected ripple. Endicott Research Group, Inc. 2601 Wayne St., Endicott NY 13760 607-754-9187 page 4. Con1-1 Con1-2 Con1-3 Con1-4 Vin(+) GND Control * NC Con2-1 Con2-2 Con2-3 Con2-4 ACout NC NC ACout * Valid when the "C" Jumper is removed 8m051994 Absolute Maximum Ratings Rating Input Voltage Range Operating Temperature Storage Temperature Symbol Vi n To Tstg Value -0.3 to +6.0 -0 to +70 -40 to +85 Units Relative Frequency 20% Typical Performance Curves Relative Frequency vs.Input Voltage 140% 120% 8m051994 Relative Brightness vs.Input Voltage Relative Brightness 15% V dc o 100% 80% 60% 40% 20% 0% 10% C C 5% o 0% Recommended Operating Conditions Rating Input Voltage Symbol Vi n Value +3 to 5.5 Units V dc -5% 2.00 3.00 4.00 5.00 6.00 2.00 3.00 4.00 5.00 6.00 Input Voltage (Vdc) Input Voltage (Vdc) Input Current vs.Input Voltage 1.00 6.0 Input Power vs.Input Voltage Electrical Characteristics Unless otherwise noted Vin = 5.00 Volts dc and Ta = 25 oC Input Power (Watts) 5.0 4.0 3.0 2.0 1.0 0.80 Input Current (Adc) 3.00 4.00 5.00 6.00 Characteristic Input Current Operating Frequency Minimum Output Voltage Efficiency Output Current Output Voltage (When powering a Sharp LM10V33 display.) Pin3 Input Current Requirement Symbol Iin Fo Vout (min) Iout Vout - Min 40 1300 - Typ .73 45 77 5.5 510 19 Max .82 50 - Units A dc KHz Vrms % marms 0.60